|
|
|
|
|
1.CONSTRUCTION OF PARENTERAL PREPARATIONS FACTORY Company Name: Omskoblresursy PTF OAO Address: 644099, Omsk, ul. Lenina, 14 Telephone/fax: (3812) 23 25 56/24 26 27 Top Manager: Aleksandr Antropenko Summary of the Project: Project Goal – construction of a factory producing vitally-needed parenteral solutions in forms and technology with no analogues in Russia and the CIS countries. The cost of product will be 1,5-2 times cheaper than that made in Krasnoyarsk, Penza and others that have lower quality and less attractive packing. The special interest are medicines in smaller packing (2-10 ml.) produced to substitute glass ampoules or in syringe-tubes. The main products of the factory are PET and medical plastic items – disposable syringes, catheters, blood and blood-substitute transfusion sets as well as high-purity apyrogenic sterile water in combination with other components (salts, glucose, etc.). Production is ecologically pure and Russian-made raw materials are used. Plastic packing makes products lighter, easier-to-use. Bottles are not fragile, freeze-resistant and can be transported without special conditions in winter. Usage of plastic ampoules is more comfortable and secures fast treatment, especially outside hospitals. The creation of the factory will allow supplying the Western-Siberian Region with high-quality effective medical preparations as well as to implement advanced production technologies using Russian raw materials. Production Volumes: 5 500 cubic meters per year Estimated Cost of the Project: US$20,1m Feasibility Study: Available Recuperation Period: 5 years 2. ORGANIZATION OF PRODUCTION OF SKP-2,1 SOWERS-CULTIVATORS Company Name: Sibzavod im. Bortsov Revolyutsii GUP Address: 644043, Omsk, Krasny Put, 89 Tel./fax: (3812) 23 24 05/23 56 14 Top Manager: Aleksandr Byrin Summary of the Project: The sowers are designed for seeding small and medium grains by bands (12-14 cm.) with simultaneous cultivation, input of granulated fertilizers and rolling ground down after sowing for areas with deficiency of humidity and in areas damaged by wind erosion. The sower secures quality of work at humidity of soil up to 25% in the layer up to 0-10 cm. The band seeding makes comfort conditions for plant development. Thickness of field can be increased up to 36%. Also is increased quantity of productive ears. Crop can be increased up to 20-24%. It may be used for fallow cultivation. There is a great demand in such sowers in the followins areas: Novosibirsk, Kurgan, Rostov, Volgograd, Saratov; in the Urals, Siberia, the Altai, Volga region, Northern Kazakhstan, countries of Central Asia and China. Estimated Cost of the Project: US$8,5m. Feasibility Study: Available Recuperation Period: 1,3 years 3.REMAKE OF THE AN-2 INTO AN-3 PLANE Company Name: Central Company “Siberian Aviation Industry” Address: 644099, Omsk, ul. Tarskaya, 11 Tel./fax: (3812) 23 46 68 Top Manager: Vladimir Ustyugov Summary of the Project: Project's goal - finishing certification of the AN-3T plane and the TVD-20 engine, preparation of serial production of the AN-3 and the TVD-20. The modification of the plane includes:
to increase payload in 1,2 times; to increase flight speed in 1,2 times; to increase climbing ability in 1,85 times; to increase reliability and safety of flight; to preserve ability to fly from ground sites with length of 500 m.; to increase economic parameters in 1,2 times. Production Volumes: up to 100 planes per year Estimated Cost of the Project: US$10,5m Feasibility Study: Available Recuperation Period: 3 years 4.ORGANIZATION OF PRODUCTION OF TETRA-BRIK ACEPTIC PACKING MATERIAL Company Name: Polipax OAO Address: 644073, Omsk, pos. Solnechny Tel./fax. (3812) 13 16 88 /14 25 11 Top Manager: Igor Falkovich Summary of the Project: Polipax OAO has experience in production of multi-layer combined materials Tetra-Pak, Tetra-Brik for packing milk, milk products, juices, etc. since 1970. The company has stable volume of realization and client sector on the market. The main goal of project - to reequip the enterprise for transfer to production of Tetra-Brik-Aceptic, Pur-Pak (Tetra-Rex) on the basis of paper, PET and aluminum foil with multi-color printing. Introduction of this packing technology will allow transferring into new technological level packing of food products. Due to the fact that the Omsk Oblast makes a variety of agri-products, introduction of this technology will achieve new level of product promotion. Estimated Cost of the Project: US$10,2m Feasibility Study: Available Recuperation Period: 2 years 5. CONSTRUCTION OF A SMALL COMPLEX FOR HYDRO-CARBON PROCESSING Company Name: Kortezh-Konversiya ZAO Address: 644092, Omsk, Krutaya Gorka Tel./fax: (3812) 25 53 60/24 66 11 Top Manager: Serguei Kondratenko Summary of the Project: Projects realization envisages construction of a small complex for yearly processing of 200 000 tons of Tyumen oil or 150 000 tons of gas condensate from Omsk or Tyumen oil fields. The products:
The technology is in compliance with all modern ecological requirements. The products can be sold easily. All non-standard equipment can be made in Russia. Estimated Cost of the Project: US$5,21m. Feasibility Study: Available Recupe ration Period: 1,5 years Construction Period: 1,5 years 6.CONSTRUCTION OF PLANT FOR UTILIZATION OF HOUSEHOLD AND INDUSTRIAL WASTE Address: 644092, Omsk, Krutaya Gorka Telephone: (3812) 91 51 00 Top Manager: Aleksandr Vergun Summary of the Project: Project's goal – construction of a plant for utilization and processing of industrial and household waste (IHW) with usage of thermo-chemical methods of processing IHW. Products of waste processing will be acetylene, thermal energy, building materials, fertilizers (ammonium sulfate). The world-level technology is one of the best Russian developments. The project is highly ecologically oriented. Launching the plant will allow to free land, to decrease possibility of epidemics, to utilize garbage. Purification of furnace gas before exhausting. Systems of water recycling for refrigeration of the equipment. Volume of processing – 40 tons of IHW per hour. Estimated Cost of the Project: US$20,3m Feasibility Study: Available Recuperation Period: 3,5 years 7. MANUFACTURING PROPYLENE, ISOPROPYLBENZOLE, ALPHAMETHYL-STYRENE, BUTADIENE METHYLSTYRENE RUBBERS, LATEXES Company Name: Omsky Kautschuk OAO Address: 644043, Omsk, Krasny Put, 89 Tel./fax: (3812) 63 08 09 / 64 10 11 Top Manager: Mikhail Satonsky Summary of the Project: After idle time re-starting production of butadiene methylstyrene rubbers, althamethylsterene, isopropylbenzole and latexes with improvement of existing technological processes, development of new kinds of production - propylene, SÊÌS-30 ÀRÊÌ-15 rubber, BS-65 N latexes Estimated Cost of the Project: US$23,2m Feasibility Study: Available Recuperation Period: 1,2 years 8. RECONSTRUCTION OF WORKSHOP FOR PRODUCTION OF MILK PRODUCTS WITH LONG SHELF LIFE WITH SUBSEQUENT PRODUCTION OF BABY FOOD Company Name: Siberian Branch of VNIMI Institute Address: 644008, Omsk, Krasny Put, 163 Telephone: (3812) 23-46-84 Top Manager: Valery Suzdaltsev Summary of the Project: Siberian branch of VNIMI is one of largest milk processing enterprises. Due to its steady long-term connections with the suppliers of raw materials, the volume of processing makes up on the average 20 000-22 000 tons per year, during summer time - up to 100-120 tons per shift. Raw materials are delivered from 20-22 milk farms from 5 districts of Omsk region. The broad assortment of production includes: milk, cream, kefir, sour cream, cottage cheese, oil creamy, dry milk, dry milk-protein concentrates, yogurt with natural fruit additives, pudding, jelly from whey, cheese paste. Volume of production sold - RR45 million annually. The trademark “ SF VNIMI ” is well known to the buyers in Omsk and also well known beyond its frontiers (Tyumen area). In Omsk products of VNIMI is sold in more than 150 shops and makes up an essential share of Omsk market and enjoys a steady demand due to its high quality, moderate prices and wide assortment. The enterprise concentrates its efforts on updating and reconstruction in accordance with long-term plans of development. The line of production of milk products with long shelf life is in great demand in Northern parts of Russia. The VNIMI plans to expand its range of products by production of baby food. Production Volumes: 5700 tons per year. Estimated Cost of the Project: US$0,9m Feasibility Study: Available Recuperation Period: 5,4 years 9. STARTING UP PRODUCTION OF TV SETS OF SIXTH GENERATION Company Name: IRTYSH PO Address: 644060, Omsk, ul. Gurtieva, 18 Tel./fax: (3812) 44 87 05 Top Manager: Anatoly Datskov Summary of the Project: The Irtysh factory has been producing black-and-white and colour TV sets for more than 40 years with the capacities allowing to produce up to 400 thousand TV sets annually. The enterprise has a design office, workshops for manufacturing printed-circuit-boards with large capacity, various plastic parts produced on 33 thermoplast machines, conveyor systems of kinescope and blocks assembly and storage of ready production, test center. The Quartz TV sets are well known in the Asian part of Russia from the Urals up to the Far East and have quite a good reputation. Taking into account ample experience in manufacturing and sales of TV sets produced by the enterprise, its well established ties with other regions of Russia, advanced network of post sale services, available industrial capacities and forcasted good marketing opportunities, it has been planned to start up the production of TV sets of the sixth generation (up to 10 000 pcs.). Due to forecasted reduction of imports of home appliances, the production of TV sets of the sixth generation will fill the niche which will be free as the importers leave the Russian market. The selling of TV sets is planned to carry out in 19 regions of the Russian Federation with total capacity of the market 213 thousand TV sets annually. The enterprise has experience in investment cooperation with foreign firms (joint projects with VOLVO AB (Sweden) and firms of Great Britain and Yugoslavia). Production Volumes: 5000 during the first year, 10 000 during the second year. Estimated Cost of the Project: US$0,5m Feasibility Study: Available Recuperation Period: 2,6 year 10.SERIAL PRODUCTION OF MOBILE MULTI-PURPOSE COMPLEXES OF MODULE EQUIPMENT FOR INTENSIFICATION AND INCREASE OF OIL RECOVERY FROM HARD-TO-REACH PLACES Company Name: Oil-and-Gas Extraction Equipment Factory DUP of the POLYOT GUP Address: 6440099, Omsk, ul. B.Khmelnitskogo Telephone/fax: (3812) 57 70 87/57 90 00 Top Manager: Serguei Krasyuk Summary of the Project: Project's goal - industrial production of Russian-made import-substituting mobile multi-purpose complexes of module equipment of new generation for construction, use, repair of boreholes, increase of oil recovery from hard-to-reach places and for gasification of industry, agriculture and dwellings. Mobile technological complex (MTK-1) for repair and recovery of inactive boreholes by methods of cutting additional holes and horizontal drilling; The MTK-1 includes the following independent modules: - self-propelled lifting unit; - mobile working floor; - universal power unit for electric energy, hot and compressed air, steam; - module of side drilling and horizontal drilling with shortened lobe drill and inclinometer ; - purifying module for drilling agent; - module of pumping drilling agent; - module of auxiliary equipment. Mobile technological complex (MTK-2) is for repair boreholes with usage of flexible pumping-compressing pipes for working at the depth of up to 4000 ì (coil tubing) The complex allows to make the following functions of stimulation of layer's work, selective processing of various zones, pumping of industrial liquids into working boreholes, usage during horizontal drilling; acid processing and breaking; pumping of cement liquid under pressure; low-discharge; hydrostatical ore reduction; work with gas lift; well's clean up; pumping of retarder; it can be included in multi-functional columns. The ÌÒÊ-2 includes: unit with flexible pumping-compressing pipes for loading-unloading operations, complex for loading-unloading operations under pressure, pumping unit for feeding industrial liquids into boreholes. Mobile technological complex (ÌÒÊ-3) for liquidation of oil spills on ground and water. ÌÒÊ-3 is for liquidation of emergency situations at pipe lines, oil refining enterprises , drilling rigs and in other energy enterprises. It includes delivery of equipment to place of oil spill, localization of oil spills on water surface and swamp areas; gathering of main volumes of spilled oil; gathering of waste polluted with oil; application of sorbents on surface; gathering of sorbents saturated with oil; application of biological preparation. The multipurpose units included in the ÌÒÊ-3 are power unit; compressing unit ; transporting container; unit of supplying hot water, self-propelled floating oil-spill ship. Mobile technological complex (ÌÒÊ-4) for increase of oil recovery of layers and construction works for boreholes for pressure with up to 105 ÌPà. ÌÒÊ-4 includes: mobile module units with capacity 200, 600, 1200 HP for 40, 70, 105 ÌPà with gas turbine drive; modules of delivery of loose and liquid components, including media based on hydrochloric acid; modules for making working mixtures, including grouting mortar; manifolds; control modules (computerized station). The proposed mobile technological complexes provide: Any oil-and-gas extraction processes at the pressure up to 105MPa, including bed separation and hydraulic jet perforations, acidizing and cementing, well killing and other wash-over works) with better quality for lower costs. On the above-mentioned equipment signed are delivery protocols with Tatneft OAO, Nizhnevartovskneftegaz-TNK OAO, Bashneft OAO, Yukos OAO, Noyabrskneftegaz OAO, Kazakhoil, Kazakhtransoil, Surgutneftegaz OAO guaranteeing sales. Estimated Cost of the Project: US$4,3m Feasibility Study: Available Recuperation Period: 2 year 11. DEVELOPMENT AND PRODUCTION OF MULTIPURPOSE MOBILE MULTI-FUEL POWER PLANTS, DRIVES AND PUMPING STATIONS WITH USAGE OF UTILIZED SMALL AVIATION GAS TURBINE ENGINES Company Name: Mechanical Factory DUP of the OMP im. Baranova FGUP Address: Omsk, Tel./fax: (3812) 393 473/536 521 Top Manager: Yuri Shipitsin Summary of the Project: Project's goal is development and production of multipurpose mobile multi-fuel power plants, drives and pumping stations with usage of utilized small aviation gas turbine engines for oil-and-gas extraction, gasification, pipeline transportation of carbohydrates: Multipurpose mobile and stationary power units, drives and pumps based on small aviation gas turbine engines are designed for: - local energy supply; - hot air supply, including for heating mechanisms and objects; - middle-pressure air supply for industrial purposes; - drive of hydraulic pumps; - hot gas heating of heat carrying agent; - production of carbonic acid and cold (at the special request); - warming-up boreholes; - driving compressors and liquefiers; - driving pumping units and ultra-high-pressure pumping systems for breakdowns, cementing, plugging and wash-over. The units can be used as main or emergency sources of electric or heat (utilized) energy. The gas turbine driver of power unit can use aviation kerosene, diesel fuel, gas, crude oil. The gas turbine units can spare funds and time during modernization of oil-and-gas units. Group pumping station BKNS-160õ400/20(40) for pumping water or chemical reagents into oil layer for maintaining inner-layer pressure. The station can save up to 60% of energy. The energy units, driver and pumping stations can function perfectly at watered fields of Siberia and Russia. On the above-mentioned equipment signed are delivery protocols with Tatneft OAO, Nizhnevartovskneftegaz-TNK OAO, Yukos OAO, Noyabrskneftegaz OAO, Kazakhoil, Kazakhtransoil, Surgutneftegaz OAO guaranteeing sales. Estimated Cost of the Project: US$2,2m Feasibility Study: Available Recuperation Period: 2,25 year 12. DEVELOPMENT AND PRODUCTION OF IMPORT-SUBSTITUTING RUBER-CORD AND RUBBER-METAL CASINGS BASED ON NEW MATERIALS FOR PRIOR OIL-EXTRACTION TECHNOLOGIES Company Name: Progress NPK GUP Address: Omsk Telephone/fax: (3812) 561-472, 560-204/560-301 Top Manager: Anatoly Yerdeev Summary of the Project: Goal of the project – development and production of a range of import-substituting ruber-cord and rubber-metal casings based on new materials for priority technologies for increase of degree of oil recovery from complicated oil deposits: - shock absorbers for drilling platforms and installations; - shock absorbers for pumping and compressing stations; - extinguishers of pulsation and hydraulic percussion of pumping and compressing stations; - long pressure-pumping hoses for oil and oil products. Rubber-cord shock absorbers are used for drilling and repair units for drilling, repair and recovery of boreholes. Low-frequency pneumatic shock absorbers of units from pumping and compressing stations with rubber-cord casings allow to:
- practically total vibration isolation of pumping units in wide range of frequencies; - no-spacer functioning; - high strength (up to hundreds of Atm.); - large compensating displacements in all directions;
They can be used for connection of mobile pipeline of ground intake with stationary platform, for connection of chains of pressure floating coal slurry pipelines, for loading and unloading oil products from tankers at sea and river terminals. On the above-mentioned equipment signed are delivery protocols with Tatneft OAO, Nizhnevartovskneftegaz-TNK OAO, Yukos OAO, Noyabrskneftegaz OAO, LUKoil OAO, Surgutneftegaz OAO, Kazakhoil, and Kazakhtransoil, guaranteeing sales. Estimated Cost of the Project: US$0,45m Feasibility Study: Available Recuperation Period: 1, 25 year 13. DEVELOPMENT AND PRODUCTION OF IMPORT-SUBSITUTING MEANS OF AUTOMATION AND CONTROL FOR PRIORITY PROCESSES OF OIL-AND-GAS EXTRACTION FOR INCREASE OF DEGREE OF OIL RECOVERY FROM COMPLICATED OIL DEPOSITS Company Name: Omsk Electromechanical Plant DUP of Siberian Devices and Systems PO FGUP Address: Omsk Telephone/fax: (3812) 542-456/548-040 Top Manager: Valery Martynov Summary of the Project: Development and production of import-subsituting means of automation and control for priority processes of oil-and-gas extraction for increase of degree of oil recovery from complicated oil deposits - highly effective magnetic activators and dispersants of borehole liquid for prevention of waxing and asphaltization, salt deposits and corrosion in devices of oil and gas supply; - multi-phase flow-meter of borehole product, performing metering in the real-time mode without separation into oil, water and gas; - optimal control stations for borehole pumping units with adaptation for conditions of a specific borehole. Magnetic activators and dispersants allow decreasing consumption of energy of borehole liquid intake up to 30%. Angara optimal control stations allow decreasing consumption of energy of borehole liquid intake up to 25% due to:
Estimated Cost of the Project: US$0,9m Recuperation Period: 1,5 year 14. CREATION AND EXPANSION OF INDUSTRIAL PRODUCTION OF MINING PRODUCTS INCREASING LABOR SAFETY IN COAL MINES AND STRIP PIT Company Name: Elektrotochpribor PO ZAO Address: Omsk Telephone/fax: (3812) 39 62 08/31 02 77 Top Manager: Vladimir Sedelnikov Summary of the Project: Goal of the Project is creation and expansion of industrial production of mining products increasing labor safety in coal mines and strip pits. - creation of new modification of SGG-7.3RV - SGG-7.4RV head lamp with hermetic accumulator and increase of yearly output from 8000 up to 12000 items; - creation of new modification of SMS-4 (SMS-4.4 RV) methane alarm and increase of yearly output from 3000 up to 6 000 items; - creation and serial production of SGT-8 head halogen lamp and increase of yearly output up to 6 000 items; - creation of new modification of SM3-1 methane alarm combined with head lamp and sound alarm RV (SM3-1RV) and increase of yearly output from 300 up to 800 items; - creation of new modification of Zh3-2460 (Zh3-2460 RV) programmable explosive alarm) and increase of yearly output from 100 up to 300 items; - creation of new modification of HN-2570 (HN-2570 RV) explosive chain resistance meter and increase of yearly output from 150 up to 1200 items; - development and serial production of FG-2552 radio alarm with yearly output up to 300 items. This equipment has no analogues in Russia and partially in the world and is an object of import-substitution. On the above-mentioned equipment signed are delivery protocols with 6 large Russian coal companies guaranteeing sales. Estimated Cost of the Project: US$0,5m Feasibility Study: Available Recuperation Period: 1,75 year 15. INDUSTRIAL PRODUCTION OF ADJUSTABLE STRAIGHT FLOW VALVES OF DRP-TYPE AND MULTI-PASS VALVES OF DRP-TYPE FOR OIL, OIL PRODUCTS, GAS AND WATER PIPE LINES WITH WORKING PRESSURE OF UP TO 250 KG./CM2 Company Name: NIID GUP Address: Omsk Telephone/fax: (3812) 333-547, 337-418/317-666 Top Manager: Pyotr Grinberg Summary of the Project: Adjustable straight flow valves of DRP-type and multi-pass valves of DRP-type are used for throttling and shut-off of oil, oil products, gas and water in pipe lines for control of pressure and working medium. Adjustable valves provide precise smooth control of flow of working medium in all the working range. Among its features are:
On the above-mentioned equipment signed are delivery protocols with Tatneft OAO, Nizhnevartovskneftegaz-TNK OAO, Slavneft-Megionneftegaz OAO, Omsk-gazifikatsiya OAO, Sibneft-Noyabrskneftegaz OAO, Omskenergo OAO, Surgutneftegaz OAO, Gazprom OAO, Kazakhoil, Kazakhtransoil, guaranteeing sales. Estimated Cost of the Project: US$37,000 Feasibility Study: Available Recuperation Period: 1, 5 year 16. ORGANIZATION OF INDUSTRIAL PRODUCTION OF LZD-240 VANE-TYPE DRILLS FOR BOREHOLE RECOVERY BY METHOD OF CUTTING OFFSHOOTS, INCLINED AND HORIZONTAL Company Name: NIID GUP Address: Omsk Telephone/fax: (3812) 333-547, 337-418/317-666 Top Manager: Pyotr Grinberg Summary of the Project: Organization of industrial production of LZD-240 vane-type drills for borehole recovery by method of cutting offshoots, inclined and horizontal, including drilling-out cement bridges, work in cased boreholes, borehole drilling with coring; cutting new boreholes from the earlier-made. Torque low rpm drills are well suited for borehole deviation, including for window cutting in casings, work milling, beginning of borehole drilling for borehole direction provide:
On the above-mentioned equipment signed are delivery protocols with Yugansk-neftegaz OAO, Nizhnevartovskneftegaz-TNK OAO, Slavneft-Megionneftegaz OAO, Bashneft OAO, Sibneft-Noyabrskneftegaz OAO, LUKoil-Kogalymneftegaz OAO, Surgutneftegaz OAO, Rosneft-Puneftegaz OAO guaranteeing sales. Estimated Cost of the Project: US$53,000 Feasibility Study: Available Recuperation Period: 1, 75 year 17. INDUSTRIAL PRODUCTION OF REPAIR PROCESSING LINES OF VARIOUS MODULE COMPONENTS, INCLUDING MOBILE ONES ON THE BASIS OF DUAL-USE HIGH TECHNOLOGIES. ORGANIZATION OF RESOURCE-SAVING RECOVERY AND PRODUCTION OF CONSUMABLE HEAVY-DUTY COMPONENTS OF OIL-AND-GAS EQUIPMENT. Company Name: NIID GUN Address: Omsk Telephone/fax: (3812) 33 35 47, 33 74 18/31 76 66 Top Manager: Pyotr Grinberg Summary of the Project: Industrial production of repair processing lines of various module components, including mobile ones on the basis of dual-use high technologies. Organization of resource-saving recovery and production of consumable heavy-duty components of oil-and-gas equipment. Technology and organization of repair includes a basic variant with use of the following highly effective resource-saving technologies and their combinations:
On the above-mentioned equipment signed are delivery protocols with Yugansk-neftegaz OAO, Nizhnevartovskneftegaz-TNK OAO, Slavneft-Megionneftegaz OAO, Bashneft OAO, Varyoganskneftegaz OAO, Gazprom OAO guaranteeing sales. Estimated Cost of the Project: US$20,000 Feasibility Study: Available Recuperation Period: 2 years 18. FAULT-TOLERANT PROCESS CONTROL SYSTEM BASED ON SPA-G1S PROGRAMMABLE AUTOMATION MEANS FOR CONTROL OF GROUP PUMPING AND COMPRESSING STATIONS Company Name: Avtomatika NPK OAO Address: Omsk Telephone/fax: (3812) 238-334/236-782 Top Manager: Viktor Polovnikov Summary of the Project: Goal of the project is creation of aggregated complexes of means of telecommunications and programmable automation means complying with world standards in the field of open systems, data transmission and processing systems and automated industrial systems, standard process control system for field equipment for oil-and-gas industry. The proposed standard process control system SPA-G1S is based on Russian computer-aided equipment with redesignable structure differs from Russian and foreign analogues by full implementation of application and net protocols. It complies with international standards in the field of open systems, data transmission and processing systems and automated industrial systems. It allows within one process control system to control distributed objects in single telecommunication medium regardless of degree of remoteness of objects form one another and regardless of means of automation of CAM systems of other levels. On the above-mentioned equipment signed are delivery protocols with Sibnef-Noyabrskneftegaz OAO, Surgutneftegaz OAO, Slavneft-Megionneftegaz OAO, Rosneft-Purneftegaz OAO guaranteeing sales. Estimated Cost of the Project: US$0,89m Feasibility Study: Available Recuperation Period: 2 years 19.SERIAL PRODUCTION OF COMPLEX MOBILE RADIO UNITS (CMRU) FOR COMPANIES SERVICING AND REPAIRING POWER TRANSMISSION LINES, OIL AND GAS PIPELINES, DEPOSIT FIELDS Company Name: ONIIP GUP Address: Omsk Telephone/fax: (3812) 538 800; 333 674/536 673; 536 681; 399 391 Top Manager: Valery Levchenko Summary of the Project: Goal of Project – supplying with SW and USW radiotelephone communication to repair groups going to hard-to-reach places for work or emergency fighting for power transmission lines, oil and gas pipelines, as well as mini-radio exchanges for providing mobile communication for hard-to-reach settlements. Each CMRU consists of two mobile engineering areas one of which is transported to the place of work and the other is place near the center of work management in a town or settlement 500 km. away or more. Each engineering area is a receiver-transmitter with subsystems: - USW phone communication, - SW phone communication (with connection with a city automatic-telephone system) and telegraph radio communication, - energy supply, - life support. A USW system is based on principles of trunking communication and provides communication between subscribers scattered within the radius of 20 km. The radio communication is made with the help of portable USW radio stations via a booster converter placed in an engineering area. If transportable radio stations are used the radius is increased up to 304-0 km. A SW-telephony and telegraphy subsystem is used the communication is provided for an CMRU placed near workplace away from a management center up to 500 km. and more. CMRU's use of modern information technologies (trunking system of USW radio communication, possibility of entering a city automatic-telephone system, high responsivity and selectivity of a transmitter and high capacity of a transmitter 350-500 Wt.) provides it high competitiveness. On the above-mentioned equipment signed are delivery protocols with Sibnef-Noyabrskneftegaz OAO, Russian Energy Ministry, Russian Emergency Ministry, Russian Ministry of Interior Affairs guaranteeing sales. Estimated Cost of the Project: US$0,188m Feasibility Study: Available Recuperation Period: 1,75 years 20. PRODUCTION OF UNIVERSAL SMALL PUMPS WITH ADJUSTABLE CAPACITY OF 0,1-9 MÇ/HOUR, PRESSURE 21 ÌPÀ FOR PUMPING ANY LIQUIDS Company NameÇ/HOUR, PRESSURE 21 ÌPÀ FOR PUMPING ANY LIQUIDS Company Name: OMKB OAO Address: Omsk Telephone/fax: (3812) 29 64 00, 29 61 33, 25 54 74/25 54 74 Top Manager: Andrei Kulkov Summary of the Project: Serial production of small NÀ4 (NÀ8) membrane-piston high-speed pumps designed for: - individual regulated pumping of water into injection wells, for dosage of corrosion and salt inhibitors; - chemical water pumping and water preparation, input and dosed supply of inhibitors; - dosed supply of reagents for lowering temperature of liquid freezing; - dosed supply and feeding control for reagents, raw materials, components, additives; - systems of fire fighting, feeding control in high-pressure water jets, including mobile ones ; - supply of solvents, , deoxidizing agent, deemulsifiers. There are advantages of the machine with the same input parameters if compared with similar machines: - much lower dimensions and weight; - possibility of regulation of productivity during work without stop; - cooling of working medium (mineral oil) is made by pumped liquid; - diagnostics of membrane destruction;
Estimated Cost of the Project: US$164,000 Feasibility Study: Available Recuperation Period: 2,25 years
Company Name: Impulse ZAO Address: 644031, Omsk, ul. Irkutskaya, 104 Telephone/fax: (3812) 39 96 60/56 78 91 Top Manager: Nikolai Petrov Summary of the Project: Impulse ZAO plans to change and to add 17 units of sewing equipment, finishing equipment and clamping equipment. That will allow to better quality, to expand product range, design, to use modern materials and technology. During installation, the enterprises (all its three workshops) will work as usual. The enterprise was founded in 1942. It produces shoes for men, women and children. Annual Output: 310 000 pair of shoes a year Estimated Cost of the Project: US$0,5m Feasibility Study: Available Recuperation Period: 2 years 22. ORGANIZATION OF BOARD PRODUCTION Company Name: Derevoobrabatyvayuschy Zavod OOO Address: 644029, Omsk, pr. Mira, 69, a/ya 97 Telephone/fax: (3812) 64 27 77/63 73 18 Top Manager: Aleksei Konduyrin Summary of the Project: Every year many forest thinners in the Omsk oblast as well as in Siberia are not used due to unprofitability of its transportation and processing. We plan to install the HEW-SAW R250 milling-squaring multiledger for making high-quality out of forest thinners. The machine makes it possible to cut crooked thinner. In one in-feed the machine allows to receive finished boards with high quality of surface and precise dimensions from plan logs with top diameter of 100-300 mm. (max. diameter of butt end – 500 mm.) and high-quality industrial pulpchips. Cost of tree-length materials is US$2,4 per a cubic meter. After transportation the cost increases up to US$5,8. Cost of finished board is US$51. Annual Output: 60 000 cubic meters. Estimated Cost of the Project: US$1,5m Feasibility Study: Available Recuperation Period: 2 years For more information contact: The Foreign Economic Relations Committee of the Omsk Oblast Administration Address: 644002, Omsk, Krasny Put 5, Russia Tel./fax (3812) 23 27 65 E-mail: kves@omskmail.ru, http:\\region.omskelecom.ru. |
|
|
